U257A DTC For Rover T 3
Rover T 3 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Rover T 3 engine control system detects a problem, the computer stores the diagnostic trouble
code U257A in its memory.
To figure out what is wrong with your vehicle you must first extract the U257A DTC For Rover T 3.
On 1999 and later U257A Rover T 3 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
U257A Rover T 3 DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 2 |
MFG - Manufacturer Specific |
| 5 |
Auxiliary Emission Controls |
| 7 |
Exhaust Gas Recirculation System Valve 1 |
| A |
TFP Valve Position Switch-Drive Without Drive Ratio |
If your U257A Rover T 3 check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system U257A and engine control unit are in charge of monitoring a bunch of different U257A DTC For Rover T 3, and if they get a reading that's a little out of whack, up pops the check engine light.
You can also check other Rover car models :
|
The listed Rover models will give information about U257A DTC.
|
