U2980 DTC For Audi Coupe
Audi Coupe Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Audi Coupe engine control system detects a problem, the computer stores the diagnostic trouble
code U2980 in its memory.
To figure out what is wrong with your vehicle you must first extract the U2980 DTC For Audi Coupe.
On 1999 and later U2980 Audi Coupe engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
U2980 Audi Coupe DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 2 |
MFG - Manufacturer Specific |
| 9 |
Transmission |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 0 |
Transmission Engaged At High Throttle Angle |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U2980 Audi Coupe code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Audi car models :
|
The listed Audi models will give information about U2980 DTC.
|
