U2980 DTC For Audi S1
Audi S1 Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Audi S1 engine control system detects a problem, the computer stores the diagnostic trouble
code U2980 in its memory.
To figure out what is wrong with your vehicle you must first extract the U2980 DTC For Audi S1.
To solve U2980 Audi S1 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
U2980 Audi S1 DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 2 |
MFG - Manufacturer Specific |
| 9 |
Transmission |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 0 |
Transmission Engaged At High Throttle Angle |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the U2980 Audi S1 code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Audi car models :
|
The listed Audi models will give information about U2980 DTC.
|
