C1348 DTC For Toyota Fj
Toyota Fj Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Toyota Fj engine control system detects a problem, the computer stores the diagnostic trouble
code C1348 in its memory.
To figure out what is wrong with your vehicle you must first extract the C1348 DTC For Toyota Fj.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check C1348 Toyota Fj that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
C1348 Toyota Fj DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 4 |
Control Module Throttle Actuator Position Performance |
| 8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
The rule of C1348 Toyota Fj code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of C1348. Likewise, overriding the OBD C1348 DTC For Toyota Fj system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.
You can also check other Toyota car models :
|
The listed Toyota models will give information about C1348 DTC.
|
