U1014 DTC For Ford Explorer Ii
Ford Explorer Ii Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Ford Explorer Ii engine control system detects a problem, the computer stores the diagnostic trouble
code U1014 in its memory.
To figure out what is wrong with your vehicle you must first extract the U1014 DTC For Ford Explorer Ii.
To solve U1014 Ford Explorer Ii problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
U1014 Ford Explorer Ii DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 1 |
MFG - Manufacturer Specific |
| 0 |
Transmission |
| 1 |
IC Circuit High Voltage |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
When you turn on the ignition, the Service Engine Soon or Check Engine U1014 Ford Explorer Ii light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If U1014 DTC For Ford Explorer Ii so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the U1014!
You can also check other Ford car models :
|
The listed Ford models will give information about U1014 DTC.
|
